8/25/2023 0 Comments Freecad 3d printing checkerIn the STL Export Options dialog box, set the file type as Binary and click OK.For example, the setting shown in the figures above (0.01 mm) is a good setting for printing models at a resolution of 0.03 mm Tolerance: Less than half of the printer’s resolution.If you do not know the other settings appropriate for your model design, try these:.In the STL Mesh Export Options dialog box, set the STL tolerance – the maximum distance allowed between the surface of the design and the polygon mesh of the STL file.Select Part > File > Export Selected > In the Save As Type box, select Stereolithography (*.stl).Because Rhinoceros software is surface-based, the complete model design (even if an assembly) is saved as a single STL part. Rhinoceros enables extensive control of STL properties when saving designs as STL files. Tip: Check your objects geometry and surface in the Object Properties tab to ensure object uniformity. Max angle = 20, Max aspect ratio = 6, Min edge length = 0.0001.Select Detail Controls from Mesh Options.To check that your mesh is uniform: Select the new object mesh > Analyze > Mass Properties > Volume.Perspective > Rendered View > Observe smoothness and confirm it meets standards.Select Polygon Mesh > Detailed Controls. ![]()
0 Comments
Leave a Reply. |
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |